-
SIM800L GPRS GSM Module
* Product Images are shown for illustrative purposes only and may differ from actual product.
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
₹199.00₹235.00SIM800L GPRS GSM Module
₹199.00₹235.00 -
1uF 50V Electrolytic Capacitor
- Capacitance: 1 micro farad
- Maximum Voltage: 50 Volts
- Tolerance: ±15%
- Max Temperature: +85°C
- Capacitor Type: Radial Through Hole Electrolytic
₹3.00 -
ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
- 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
- Support Three Modes: AP, STA, and AP+STA
- ESP 32 is safe, reliable, and scalable to a variety of applications
- Ultra-Low power consumption works perfectly with the IDE
- Support LWIP protocol, Freertos
₹335.00 -
3.3uF 50V Electrolytic Capacitor
* Product Images are shown for illustrative purposes only and may differ from actual product.
- Capacitance: 3.3uF
- Voltage: 50V
- Capacitor Type: Electrolytic
₹3.00 -
NodeMcu ESP8266 Wifi Dev. Board
- Power input: 4.5V ~ 9V (10VMAX), USB powered
- Transfer rate: 110-460800bps
- Working temperature: -40°C ~ + 125°C
- Support Smart Link Smart Networking
- Drive Type: Dual high power H bridge
- Don’t need to download resetting
- Flash size: 4MByte
- Lowest cost WI-FI
₹162.00₹179.00NodeMcu ESP8266 Wifi Dev. Board
₹162.00₹179.00 -
lm35 temperature sensor
- Calibrated directly in Degree Celsius
- Suitable for remote applications
- Low cost due to wafer level trimming
- Operates from 4 to 30 volts
- Low self-heating, 0.08°C in still air
- Less than 60 mA current drain
- Non-linearity only 0.25°C typical
₹70.00lm35 temperature sensor
₹70.00 -
NTC Thermistor Temperature Sensor Module with 3 pins
- Thermistor Type: NTC
- Pins: 3 Pins (VCC, GND, Output)
- Temperature Range: -40°C to 125°C (approx)
- Working Voltage: 3.3V to 5V (depending on microcontroller)
- Output: Analog voltage corresponding to the temperature
₹30.00 -
2mm PNP Inductive Proximity Sensor
- Current: 200mA
- Setting: 0 ~ 1.4mm
- original, High Quality
- Thread: M12
- Output: PNP NO
- Install: Flush (Shielded)
- Distance: 2mm
₹255.00 -
1/2 Inch Water Flow Sensor
- This sensor is lightweight, small in size, and simple to install.
- This water flow sensor sits in line with your water line and contains a pinwheel sensor to measure how much water has moved through it.
- This has an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution.
- The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
₹172.00₹194.001/2 Inch Water Flow Sensor
₹172.00₹194.00 -
2.2uF 50V Electrolytic Capacitor
- Structure: Fixed Capacitor
- Type: Aluminum Electrolytic Capacitor radial type
- Material: Plastic+Metal
- Capacitance Value: 2.2uF
- Voltage: 50V
- Mounting Type: Through Hole
- Operating Temperature (°C): -40 to 105
- Tolerance on Capacitance: ± 20 %
₹3.00 -
2.2uF/ 63V electrolytic capacitors
- Capacitance: 2.2uF
- Voltage: 63V
- Tolerance: ±15%
- Type: Electrolytic Radial though hole
₹3.00 -
Digital LDR Light Sensor Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
₹30.00
