Roll over image to zoom in
DHT11 Temperature & Humidity Sensor
₹56.00
- The Operating Voltage of the DHT-11 Humidity And Temperature Sensor Module is 3.3VDC to 5.5VDC
- The DHT-11 Humidity And Temperature Sensor Module is a basic, ultra low-cost digital temperature and humidity sensor
- DHT11 sensor is good for 20-90% humidity readings.
- The module can detect the surrounding environment of the humidity and temperature
- The Module is highly reliability, excellent long-term stability and Low power consumption.
- The DHT11 Module has fixed bolt hole and easy installation
Description
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment. DHT11 can be interface with any microcontroller like Arduino, Raspberry Pi, etc., and get instantaneous results. DHT11 is a low-cost humidity and temperature sensor which provides high reliability and long term stability.
Features:
- DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
- Good for 20-80% humidity readings with 5% accuracy
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-50°C temperature readings ±2°C accuracy.
- The board has a pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
Reviews
There are no reviews yet.